B.reuschling h da main patch 68456

Use active voice.

Change interlocutor to participant, which is more common and used in the rest of the document as well.

content/encryption/_index.en.md

@@ -8,41 +8,41 @@ weight: 60
 
 # Use of end-to-end encryption
 
-1:1 calls are now encrypted end-to-end by default. Therefore, a configured key backup as well as a verification of all self used client devices is recommended ([Important settings]({{< ref "settings" >}}))
+By default, 1:1 calls are end-to-end encrypted now. Therefore, a configured key backup as well as a verification of all self-used client devices is recommended ([Important settings]({{< ref "settings" >}}))
 
-The decision whether a created room should be encrypted in this way must be well thought out and cannot be undone. If the room is large or public, checking all keys of all interlocutors could take a lot of time. But this manual check can be done later on occasion and end-to-end encrypted conversations can be started directly with blind trust for the time being.
+The decision whether a created room should be encrypted in this way must be well thought out and cannot be undone. If the room is large or public, checking all keys of all participants can take a lot of time. This manual check is done later on occasion and end-to-end encrypted conversations are started directly with blind trust for the time being.
 
 ![Create new room with activated encryption](/images/01_Create-Room-wE2E_en.png)
 
-If you want end-to-end encryption (E2EE) to interlocutor:inside in an unencrypted room, you can achieve this by clicking on the settings of the desired room. (or in the room via "Room info" > "Room settings" in the upper right corner):
+If end-to-end encryption (E2EE) to interlocutor:inside in an unencrypted room is needed, click on the settings of the desired room (or in the room via "Room info" > "Room settings" in the upper right corner):
 
 ![Menu to get to the room settings](/images/02_Roomsettings_en.png)
 
-To do this, move the Encrypted slider on the Security & Privacy tab:
+To do this, activate the Encrypted slider on the Security & Privacy tab:
 
 ![Enable encryption in the room settings](/images/03_Roome2e_en.png)
 
-This can be confirmed with OK. From now on the messages can only be read by those involved in the conversation. If you have not set up a key protection in the settings before, you should do this now (see [Important settings]({{< ref "settings" >}})) to be able to read earlier and in absence received messages.
+Confirm with OK. From now on only those involved in the conversation are able to read the messages. When no key protection has been set up in the settings before, do it now (see [Important settings]({{< ref "settings" >}})) to read earlier messages and those received in absence.
 
-Now the encrypted exchange can begin. If you want to verify the correctness of the keys and to document this trustworthiness digitally, you first have to unfold the sidebar by clicking on the person symbol in the upper right corner:
+The encrypted exchange can begin now. To verify the correctness of the keys and to document this trustworthiness digitally, first unfold the sidebar by clicking on the person symbol in the upper right corner:
 
 ![open the list of persons in the room](/images/04_RoomPeople_en.png)
 
-The contact person can now be clicked on in the opening bar of the participants in the conversation:
+Click the contact person in the opening bar of the participants in the conversation:
 
 ![room with note that not all participants are verified](/images/05_People-Unverified_en.png)
 
-The bar now shows the conversation person in detail. Here a key verification can be initiated by clicking on "Verify". By clicking on "Start Verification" the other side is notified and after confirmation (see next picture) the "Verification by Emojis" can start.
+The bar shows the conversation person in detail now. Here a key verification is initiated by clicking on "Verify". The other side is notified by clicking on "Start Verification". After confirmation (see next picture) the "Verification by Emojis" starts.
 
 ![Menu to the person to verify selected with the verify button](/images/06_E2EE_Verify_en.png)
 
 ![Menu to start the verification](/images/07_E2EE_Accept_en.png)
 
-This verification should be done with the contact person by comparison (e.g. verbally via telephone, in the same room or other medium). Since this is not always easy, the trust can also be expressed first of all (otherwise you will be asked again and again to carry out the verification) and carried out on occasion (e.g. at the next meeting).
+This verification should be done with the contact person by comparison (e.g. verbally via telephone, in the same room or other medium). Since this is not always easy, the trust can also be expressed first (otherwise the verification is asked again and again) and carried out on occasion (e.g. at the next meeting).
 
-A detailed description of the topic can be found in this [video by Prof. Plikat](https://invidious.ggc-project.de/VOxfa6dqXSk) and [in this Matrix blog article](https://blog.riot.im/e2e-encryption-by-default-cross-signing-is-here).
+A detailed description of the topic is shown in this [video by Prof. Plikat](https://invidious.ggc-project.de/VOxfa6dqXSk) and [in this Matrix blog article](https://blog.riot.im/e2e-encryption-by-default-cross-signing-is-here).
 
-The adjustment itself is done via emoji images or QR codes, which can look different depending on the device and icon pack. Also the translation of all interface elements into German is not 100% available.
+The adjustment itself is done via emoji images or QR codes, which look different depending on the device and icon pack. Also, the translation of all interface elements into German is not 100% available.
 
 ![Emoji comparison to verify the key exchange](/images/16_E2EE.png)
 
@@ -50,7 +50,7 @@ This is done analogously in rooms with several participants, each one individual
 
 ![verification process was successful](/images/08_Verified_en.png)
 
-In the respective room rows the following symbols indicate the status of the encryption and the corresponding verification:
+ The following symbols indicate the status of the encryption and the corresponding verification in the respective room rows:
 
 ![symbol for at least one non-verified person](/images/gray.png)