Student-Projects/2024-Rocket-Motor-Verification.md

+[TOC]
+
 The different parameters in the launch of a model rocket shall be verified using a motor test stand, rocket flight simulation and test launches with sensors on board. The results shall be presented during the 2024 DLA Launch Day.
 
 # Project goals
@@ -8,15 +10,13 @@ The different parameters in the launch of a model rocket shall be verified using
 
 Ideally a team of 3-4 students shall work on this project.
 
-# Project background
-
-## Model Rocket
+# Model Rocket
 
 A standard 35 mm model rocket shall be used in test flights and simulation: [List of available rockets](https://www.raketenmodellbau-klima.de/Raketenmodellbau/Raketenbausaetze/Quick-Easy.htm?shop=raketenklima&SessionId=&a=catalog&t=23&c=65&p=65)
 
 ![](https://www1.grc.nasa.gov/wp-content/uploads/rktparts-600x450.gif)
 
-## Model rocket flight phases
+# Flight phases
 
 Model rocket flights can be divided into different flight states [[1](https://code.fbi.h-da.de/hda10343/dla/-/wikis/Altimeter#sources)]:
 
@@ -27,7 +27,7 @@ Model rocket flights can be divided into different flight states [[1](https://co
 3. Coasting
 4. Recovery
 
-## Rocket Motors
+# Rocket Motors
 
 Model rockets are propelled by rocket motors. The achievable flight altitude strongly depends on the thrust characteristics of the rocket motor. 
 
@@ -39,13 +39,13 @@ The rocket motors that are commercially available are standardized and have pred
 
 ![](https://www.raketenmodellbau-klima.de/raketenklima/prodpic/galerie/treibsatz-technische-daten.png)
 
-## Motor Test Stand
+# Motor Test Stand
 
 In order to verify the motor characteristics and choose the correct motors for a project, a motor test stand shall be designed to measure these characteristics and other data associated with a model rocket motor. The test stand shall be able to test standard size motors (18 mm diameter) but also larger motors in the future. It shall be able to measure thrust and ejection forces over time. The motor shall be electrically started and the data shall be recorded with an adequate measurement rate.
 
 ![Rocket_Motor_Test_Stand](uploads/c3eb5a8c445ed9c59cee7392f019214b/Rocket_Motor_Test_Stand.png)
 
-## Altimeter
+# Altimeter
 
 The sensor platform that was developed in [previous projects](2023 Altimeter WLAN) shall be used for in-flight data recording. It shall be modified if necessary (hardware and software).
 ![Sensorboard_front](uploads/5e26e1bd73622ac57b0e7d64de2d8296/Sensorboard_front.png)