Labs/Lab01.md

@@ -88,42 +88,37 @@ In here, the UUID is also visible which we need for the next step:![Lab00_mne_li
 
 **Please note that the UUID may vary.**
 
-## Configuration of the switches(the UUID have to be changed according to the output from the devices)
+## Configuration of the switches
 
 ### Switch 0
 
-```bash
-mne set 401982c5-fb98-4402-b98f-1b6d30915fc4 network-instances/network-instance[name=default]/config --file ./lab00/enable-routing.json   --force-push
-mne set 401982c5-fb98-4402-b98f-1b6d30915fc4 interfaces/interface[name=Ethernet1] --file ./lab00/s01-ethernet01.json  --force-push
-mne set 401982c5-fb98-4402-b98f-1b6d30915fc4 interfaces/interface[name=Ethernet2] --file ./lab00/s01-ethernet02.json  --force-push
-mne set 401982c5-fb98-4402-b98f-1b6d30915fc4 network-instances/network-instance[name=default]/protocols --file ./lab00/s01-route.json --force-push
-mne set 401982c5-fb98-4402-b98f-1b6d30915fc4 network-instances/network-instance[name=default]/tables --file ./lab00/tables.json --force-push
-```
-
-### Modify interface eth1
+#### Modify interface eth1
 ```bash
 mne path set <UUID of Switch0> interfaces/interface[name=Ethernet1] --file ./lab00/s01-ethernet01.json  --force-push
 ```
-### Modify interface eth2
+#### Modify interface eth2
 ```bash
 mne path set <UUID of Switch0> interfaces/interface[name=Ethernet2] --file ./lab00/s01-ethernet02.json  --force-push
 ```
-### Insert the routes
+#### Insert the routes
 ```bash
 mne path set <UUID of Switch0> network-instances/network-instance[name=default]/protocols --file ./lab00/s01-route.json --force-push
 ```
 
 ### Switch 1
 
+### Modify interface eth1
 ```bash
-mne set c724b95b-c751-4728-9f19-376e0d570104 network-instances/network-instance[name=default]/config --file ./lab00/enable-routing.json   --force-push
-mne set c724b95b-c751-4728-9f19-376e0d570104 interfaces/interface[name=Ethernet1] --file ./lab00/s02-ethernet01.json  --force-push
-mne set c724b95b-c751-4728-9f19-376e0d570104 interfaces/interface[name=Ethernet2] --file ./lab00/s02-ethernet02.json  --force-push
-mne set c724b95b-c751-4728-9f19-376e0d570104 network-instances/network-instance[name=default]/protocols --file ./lab00/s02-route.json --force-push
-mne set c724b95b-c751-4728-9f19-376e0d570104 network-instances/network-instance[name=default]/tables --file ./lab00/tables.json --force-push
+mne path set <UUID of Switch1> interfaces/interface[name=Ethernet1] --file ./lab00/s01-ethernet01.json  --force-push
+```
+### Modify interface eth2
+```bash
+mne path set <UUID of Switch1> interfaces/interface[name=Ethernet2] --file ./lab00/s01-ethernet02.json  --force-push
+```
+### Insert the routes
+```bash
+mne path set <UUID of Switch1> network-instances/network-instance[name=default]/protocols --file ./lab00/s01-route.json --force-push
 ```
-
-If you've cloned the goSDN repo from [here](https://code.fbi.h-da.de/danet/gosdn) and have all the requirements, then you can start the containerlab topology (which is defined below) using the command `make containerlab-start` from within the root of the repository
 
 ## CLI and the controller