Labs/Lab01.md

@@ -66,17 +66,19 @@ In here, the UUID is also visible which we need for the next step:![Lab00_mne_li
 **Please note that the UUID may vary.**
 
 ## Configuration of the switches
+In this step, the network interfaces and routing configuration for each switch will be set up. With the goSDN CLI, the configuration can also be changed by specifying the path to a .json file which contains the new values.
+
+### Download the folder below and place it into the artifacts folder of your gosdn folder [Lab01.zip](uploads/b59afb6e62ff078c425d669c9607b752/Lab01.zip) or get it with wget if you are using Linux:
 
-### Download the folder below and place it into the artifacts folder of your gosdn folder [Lab01.zip](uploads/7cd972bedd7c3d29f83707907f8c42ae/Lab01.zip) or get it with wget if you are using Linux:
 ```bash
-wget https://code.fbi.h-da.de/danet/gosdn/-/wikis/uploads/7cd972bedd7c3d29f83707907f8c42ae/Lab01.zip
+wget https://code.fbi.h-da.de/danet/gosdn/-/wikis/uploads/b59afb6e62ff078c425d669c9607b752/Lab01.zip
 ```
 Afterwards, unzip Lab01.zip:
 ```bash
 unzip Lab01.zip
 ```
 ### Optional: Use the script in Lab01 to copy-paste configuration commands
-The directory Lab01 contains different files for the switch interfaces and routing configurations. For each of this, the path to the file has to be modified manually. To simplify the process and avoid typos, the script delivered with Lab01.zip can be used. To set it up, it has to be built:
+The directory Lab01 contains different files for the switch interfaces and routing configurations. For each of this, a command on the SDN controller CLI has to be set up that specifies the path to the file and the path on the switch that has to be modified. To simplify the process and avoid typos, the script delivered with Lab01.zip can be used. To set it up, it has to be built:
 ```bash
 go build -o buildclicommands main.go
 ```